
SERVICE HOTLINE:
13794832878
- GC-BAME002
- DIN Abrasive Paper (germany)
Imported from BAM, Germany. It is used in conjunction with DIN wear resistance test. Before the wear resistance test of shoe material (rubber), the DIN standard glue provided by our company should be used to check whether the sand particles meet the test requirements. If they are too sharp, please correct them with aluminum blocks. If they fail to meet the standard wear requirements after several times of use, they must be replaced with a new piece of sandpaper In Adidas ge-27 DIN friction Is specified for use in the standard The Reference Material(BAM-E002) delivered by BAM. Working Group "Elastomers and Reference Materials" (6.31), is prepared for test purposes and tested in accordance with DIN EN ISO/IEC 17025:2005
The Abrasive Cloths Number 12093 to 12104 are in conformance with ISO 4649, Annex A.
They are stamped with the following marks:
BAM (producer)
Abrasive Cloth (article)
ISO 4649; Annex A (standerd;clause)
Number: XXXXX (number of cloth)
- According to standard:
- ISO 4649-2002;DIN 53516;DIN EN ISO/IEC 17025;GT/T9867/SATRA TM174、BS-903...
| size: | 40.5 × 47.5cm, 60\td> |
| package: | 5 sheets / group |
GCI Testing Instrument Co., Ltd
电话:+86 0769-22322732 手机:13794832878(微信同号)
联系人:Mr.chen 邮箱:Janray@163.com
地址:No. 41, East Zone 2, Xinxing Street, Datangtou, Dongcheng District, Dongguan City
Copyright © GCI Testing Instrument Co., Ltd All Rights Reserved.

Pay attention to wechat

Browse mobile site


